PartsTable
Technical Data Sheet
Download PDF

5-13-10850-2 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5-13-10850-2: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include overall_length: 22.00 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), special_features: HINGE IS GREEN 383 IAW FED-STD-595 34094, style_designator: BUTT, surface_treatment: UNABLE TO DECODE, material_thickness: 0.09 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-706-6797, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-13-10850-2
NSN: 5340-01-706-6797
FSC: 5340 — Hardware, Commercial
CAGE: 0WJE1 — HDT EXPEDITIONARY SYSTEMS INC (USA)
SPECIFICATIONS
overall_length22.00 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
special_featuresHINGE IS GREEN 383 IAW FED-STD-595 34094
style_designatorBUTT
surface_treatmentUNABLE TO DECODE
material_thickness0.09 INCHES NOMINAL IN
mounting_hole_quantity22
end_item_identification8145-01-659-8110
part_name_assigned_by_controlling_agencyHINGE, BELT ACCESS DOOR, MTRCS
center_to_center_distance_between_mounting_holes_along_length2.00 INCHES NOMINAL IN
NSN5340-01-706-6797
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5-13-10850-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: BUTT
•
MATERIAL THICKNESS: 0.09 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 2.00 INCHES NOMINAL IN
•
SURFACE TREATMENT: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY22
MOUNTING METHODUNTHREADED HOLE(S)
STYLE DESIGNATORBUTT
OVERALL LENGTH22.00 INCHES NOMINAL IN
MATERIAL THICKNESS0.09 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH2.00 INCHES NOMINAL IN
SPECIAL FEATURESHINGE IS GREEN 383 IAW FED-STD-595 34094
SURFACE TREATMENTUNABLE TO DECODE
PART NAME ASSIGNED BY CONTROLLING AGENCYHINGE, BELT ACCESS DOOR, MTRCS
END ITEM IDENTIFICATION8145-01-659-8110
SUBSTITUTES & CROSS-REFERENCES 1
5-13-10850Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5-13-10850-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-13-10850-2?
5-13-10850-2 is a HINGE,BUTT.
What parts can replace 5-13-10850-2?
There is 1 known substitute for 5-13-10850-2: 5-13-10850. Substitute compatibility should be verified for your specific system.
What is the NSN for 5-13-10850-2?
5-13-10850-2 is cataloged in the U.S. Government catalog under NSN 5340-01-706-6797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-13-10850-2