PartsTable
Technical Data Sheet
Download PDF

5-13-10059-2 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5-13-10059-2: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.59 INCHES NOMINAL IN, diameter: 1.57 INCHES NOMINAL IN, material: STEEL OVERALL, end_radius: 0.560 INCHES NOMINAL IN, head_style: FLAT CHAMFER, head_height: 0.59 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-706-6090, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-13-10059-2
NSN: 5315-01-706-6090
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 4JKJ9 — BERG MANUFACTURING, INC. (USA)
SPECIFICATIONS
height0.59 INCHES NOMINAL IN
diameter1.57 INCHES NOMINAL IN
materialSTEEL OVERALL
end_radius0.560 INCHES NOMINAL IN
head_styleFLAT CHAMFER
head_height0.59 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
under_head_length5.709 INCHES NOMINAL IN
head_inside_diameter1.161 INCHES NOMINAL IN
end_item_identification8145-01-659-8110
part_name_assigned_by_controlling_agencyROLLER PIN
NSN5315-01-706-6090
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5-13-10059-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD INSIDE DIAMETER: 1.161 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.59 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 5.709 INCHES NOMINAL IN
•
END RADIUS: 0.560 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: STRAIGHT
•
DIAMETER: 1.57 INCHES NOMINAL IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
HEAD INSIDE DIAMETER1.161 INCHES NOMINAL IN
HEAD HEIGHT0.59 INCHES NOMINAL IN
UNDER HEAD LENGTH5.709 INCHES NOMINAL IN
END RADIUS0.560 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
STYLE DESIGNATORSTRAIGHT
DIAMETER1.57 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
HEIGHT0.59 INCHES NOMINAL IN
COLORGREEN, 383
SUBSTITUTES & CROSS-REFERENCES 1
5-13-10059Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5-13-10059-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-13-10059-2?
5-13-10059-2 is a PIN,STRAIGHT,HEADED.
What parts can replace 5-13-10059-2?
There is 1 known substitute for 5-13-10059-2: 5-13-10059. Substitute compatibility should be verified for your specific system.
What is the NSN for 5-13-10059-2?
5-13-10059-2 is cataloged in the U.S. Government catalog under NSN 5315-01-706-6090. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-13-10059-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.