PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5-11-420 ITEM 6-19
5-11-420 ITEM 6-19 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include mounting_method: UNTHREADED HOLE(S), mounting_facility_diameter: 0.688 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN, material_document_and_classification: AISI 416 ASSN STD SINGLE MATERIAL RESPONSE OVERALL, center_to_center_distance_between_mounting_facilities_parallel_to_length: 14.245 INCHES MINIMUM AND 14.255 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-999-9887, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-11-420 ITEM 6-19
NSN: 5340-00-999-9887
FSC: 5340
CAGE: 81337 — W1D1 NATICK SOLDIER CENTER DBA US ARMY CCDC SOLDIER CENTER DIV COMBAT CAPABILITIES DEVELOPMENT COMMAND - SOLDIER CENTER (USA)
SPECIFICATIONS
mounting_methodUNTHREADED HOLE(S)
mounting_facility_diameter0.688 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
mounting_facility_quantity2
material_document_and_classificationAISI 416 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length14.245 INCHES MINIMUM AND 14.255 INCHES MAXIMUM IN
NSN5340-00-999-9887
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5-11-420 ITEM 6-19 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 14.245 INCHES MINIMUM AND 14.255 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 416 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING FACILITY DIAMETER: 0.688 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING FACILITY QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH14.245 INCHES MINIMUM AND 14.255 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 416 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MOUNTING FACILITY DIAMETER0.688 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
26-4851CInterchangeable
interchangeable cross-reference
interchangeable
3787Interchangeable
interchangeable cross-reference
interchangeable
04851Interchangeable
interchangeable cross-reference
interchangeable
800569Interchangeable
interchangeable cross-reference
interchangeable
447137Interchangeable
interchangeable cross-reference
interchangeable
15036PP62Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5-11-420 ITEM 6-19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-11-420 ITEM 6-19?
5-11-420 ITEM 6-19 is a HANDLE,BAIL.
What parts can replace 5-11-420 ITEM 6-19?
There are 12 known substitutes for 5-11-420 ITEM 6-19: 26-4851C, 3787, 04851 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5-11-420 ITEM 6-19?
5-11-420 ITEM 6-19 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-999-9887. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-11-420 ITEM 6-19

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026