PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5-10314
5-10314 ✓ Verified by PartsTable
Peach · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

Peach Gloss Laminating Pouch A3, 125 mic: Peach Laminating Accessories can also be used with laminators from other manufacturers for results that provide perfect protection. Key specifications include material: PLASTIC POLYVINYL OVERALL, tip_type: OPEN END, inflation_device: PILOT BALLOON, nominal_diameter: 7.0 MILLIMETERS MM, special_features: NASAL AND ORAL; W/15 MM. TAPERED CONNECTOR,INFLATING TUBE; AND HIGH VOLUME LOW PRESSURE CUFF; UNIT QTY 10 MM, style_designator: TRACHEAL W/ CUFF.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4710-01-189-1078, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-10314
NSN: 4710-01-189-1078
FSC: 4710
CAGE: 24658 — GENERAL REGULATOR CORP. DBA ACCUDRIV (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL OVERALL
tip_typeOPEN END
inflation_devicePILOT BALLOON
nominal_diameter7.0 MILLIMETERS MM
special_featuresNASAL AND ORAL; W/15 MM. TAPERED CONNECTOR,INFLATING TUBE; AND HIGH VOLUME LOW PRESSURE CUFF; UNIT QTY 10 MM
style_designatorTRACHEAL W/ CUFF
features_providedSTERILE AND DISPOSABLE AND X-RAY OPACITY
design_designationMURPHY
core_fabrication_methodNOT WOVEN
NSN4710-01-189-1078
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 5-10314 · Peach ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER SINGLE END
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER SINGLE END
SPECIAL FEATURESBRASS MOUNTING PLATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10069Interchangeable
interchangeable cross-reference
interchangeable
SCD10561-10069Interchangeable
interchangeable cross-reference
interchangeable
20105Interchangeable
interchangeable cross-reference
interchangeable
74069Interchangeable
interchangeable cross-reference
interchangeable
402Interchangeable
interchangeable cross-reference
interchangeable
10069-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5-10314?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-10314?
5-10314 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Peach.
What parts can replace 5-10314?
There are 18 known substitutes for 5-10314: 10069, SCD10561-10069, 20105 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5-10314?
5-10314 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4710-01-189-1078. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-10314

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026