PartsTable
Technical Data Sheet
Download PDF

5-006N304-75 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5-006N304-75: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.942 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN, center_hole_diameter: 0.791 INCHES MINIMUM AND 0.801 INCHES MAXIMUM IN, elongation_percentage: 164 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-044-5232, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5-006N304-75
NSN: 5331-01-044-5232
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.942 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
center_hole_diameter0.791 INCHES MINIMUM AND 0.801 INCHES MAXIMUM IN
elongation_percentage164 MAXIMUM
cross-sectional_height0.077 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
NSN5331-01-044-5232
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5-006N304-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.077 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.942 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 164 MAXIMUM
•
CENTER HOLE DIAMETER: 0.791 INCHES MINIMUM AND 0.801 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.077 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.942 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE164 MAXIMUM
CENTER HOLE DIAMETER0.791 INCHES MINIMUM AND 0.801 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5-006N304-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5-006N304-75?
5-006N304-75 is a O-RING.
What is the NSN for 5-006N304-75?
5-006N304-75 is cataloged in the U.S. Government catalog under NSN 5331-01-044-5232. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5-006N304-75

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.