PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5/8-6
5/8-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 5/8-6 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-619-0222, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5/8-6
NSN: 5340-00-619-0222
FSC: 5340
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
Part Number5/8-6
NSN5340-00-619-0222
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5/8-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 49956-214-1043 MANUFACTURERS SPECIFICATION CONTROL AND 49761-8811154 MANUFACTURERS SPECIFICATION CONTROL AND 97942-1JA7562 MANUFACTURERS STANDARD
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.654 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.857 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA49956-214-1043 MANUFACTURERS SPECIFICATION CONTROL AND 49761-8811154 MANUFACTURERS SPECIFICATION CONTROL AND 97942-1JA7562 MANUFACTURERS STANDARD
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.654 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYAMIDE NYLON BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.857 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
155-8593-001Upgraded Successor
successor cross-reference
successor
214-1043P10Upgraded Successor
successor cross-reference
successor
2530000806572Interchangeable
interchangeable cross-reference
interchangeable
11601248Interchangeable
interchangeable cross-reference
interchangeable
574K51Interchangeable
interchangeable cross-reference
interchangeable
1401363Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5/8-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5/8-6?
5/8-6 is a 5/8-6.
What parts can replace 5/8-6?
There are 26 known substitutes for 5/8-6: 155-8593-001, 214-1043P10, 2530000806572 and 23 more. Substitute compatibility should be verified for your specific system.
Is 5/8-6 still available?
5/8-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5/8-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026