PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5/8-11UNC-3A X 2L1

5/8-11UNC-3A X 2L1 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The STUD,CONTINUOUS THREAD is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400, thread_class: 3A LOCATION NOT OTHERWISE SPECIFIED A, overall_length: 2.000 INCHES NOMINAL IN, thread_direction: RIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED, nominal_thread_size: 0.625 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, thread_quantity_per_inch: 11 LOCATION NOT OTHERWISE SPECIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5307-00-485-9941, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5/8-11UNC-3A X 2L1
NSN: 5307-00-485-9941
FSC: 5307
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400
thread_class3A LOCATION NOT OTHERWISE SPECIFIED A
overall_length2.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
nominal_thread_size0.625 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
thread_quantity_per_inch11 LOCATION NOT OTHERWISE SPECIFIED
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) LOCATION NOT OTHERWISE SPECIFIED
nondefinitive_spec/std_dataIV TYPE
criticality_code_justificationZZZX
departure_from_cited_designatorMATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
material_document_and_classificationQQ-N-281,CL A,GR 400 FED SPEC SINGLE MATERIAL RESPONSE
NSN5307-00-485-9941
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5/8-11UNC-3A X 2L1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A193-62T ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD CLASS: 2A LOCATION NOT OTHERWISE SPECIFIED A
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
•
THREAD QUANTITY PER INCH: 11 LOCATION NOT OTHERWISE SPECIFIED
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) LOCATION NOT OTHERWISE SPECIFIED
•
THREAD DIRECTION: RIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A193-62T ASSN STD SINGLE MATERIAL RESPONSE
OVERALL LENGTH3.687 INCHES MINIMUM AND 3.813 INCHES MAXIMUM IN
THREAD CLASS2A LOCATION NOT OTHERWISE SPECIFIED A
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
THREAD QUANTITY PER INCH11 LOCATION NOT OTHERWISE SPECIFIED
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC) LOCATION NOT OTHERWISE SPECIFIED
THREAD DIRECTIONRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
MATERIALSTEEL
NONDEFINITIVE SPEC/STD DATA4 TYPE
NOMINAL THREAD SIZE0.625 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
3/4 IN (ROUND)FORM 1L1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
QQ-N-281 GR400 CLASS AL1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
QQ-N-281 GR400 CLASS AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5/8-11UNC-3A X 2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-DTL-1222 TYPE IVL1InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
MIL-DTL-1222 TYPE IVInterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5/8-11UNC-3A X 2L1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5/8-11UNC-3A X 2L1?
5/8-11UNC-3A X 2L1 is a STUD,CONTINUOUS THREAD.
What parts can replace 5/8-11UNC-3A X 2L1?
There are 6 known substitutes for 5/8-11UNC-3A X 2L1: 3/4 IN (ROUND)FORM 1L1, QQ-N-281 GR400 CLASS AL1, QQ-N-281 GR400 CLASS A and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5/8-11UNC-3A X 2L1?
5/8-11UNC-3A X 2L1 is cataloged in the Federal Logistics Information System under NSN 5307-00-485-9941. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5/8-11UNC-3A X 2L1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026