PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5/32 D LG=1

5/32 D LG=1 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SPRING is a the manufacturer industrial component. Key specifications include diameter: 0.156 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, overall_length: 1.000 INCHES NOMINAL IN, special_features: DRILL THRU 0.156 TO 0.160 ON CENTER FOR PT 77 AT ASSY IN SHOP, style_designator: COILED, end_item_identification: SCUTTLE; NIMITZ CLASS CVN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5315-01-468-9943, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5/32 D LG=1
NSN: 5315-01-468-9943
FSC: 5315
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter0.156 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
overall_length1.000 INCHES NOMINAL IN
special_featuresDRILL THRU 0.156 TO 0.160 ON CENTER FOR PT 77 AT ASSY IN SHOP
style_designatorCOILED
end_item_identificationSCUTTLE; NIMITZ CLASS CVN
material_document_and_classificationMIL-P-1097 TY2,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-01-468-9943
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5/32 D LG=1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: COILED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-1097 TY2,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.156 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCOILED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-1097 TY2,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.156 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
SPECIAL FEATURESDRILL THRU 0.156 TO 0.160 ON CENTER FOR PT 77 AT ASSY IN SHOP
END ITEM IDENTIFICATIONSCUTTLE; NIMITZ CLASS CVN
OVERALL LENGTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
124-4322649InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
124-4322649 PC 21InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
124-4322648 PC 22InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
124-4366739 PCInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
124-4322649 PC 31InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5 LG=3InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5/32 D LG=1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5/32 D LG=1?
5/32 D LG=1 is a PIN,SPRING.
What parts can replace 5/32 D LG=1?
There are 22 known substitutes for 5/32 D LG=1: 124-4322649, 124-4322649 PC 21, 124-4322648 PC 22 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5/32 D LG=1?
5/32 D LG=1 is cataloged in the Federal Logistics Information System under NSN 5315-01-468-9943. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5/32 D LG=1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026