PartsTable
Technical Data Sheet
Download PDF

5 INCHES (ROUNDBAR) — NOZZLE,LUBRICATING,NONAIRCRAFT G

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

5 INCHES (ROUNDBAR): NOZZLE,LUBRICATING,NONAIRCRAFT G.

NOZZLE,LUBRICATING,NONAIRCRAFT G. Key specifications include length: 8.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: STEEL, heat_treatment: ANNEALED, basic_shape_style: ROUND, criticality_code_justification: ZZZX, cross_section_outside_diameter: 5.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 9510-00-107-8299, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5 INCHES (ROUNDBAR)
NSN: 9510-00-107-8299
FSC: 9510 — Bars and Rods
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
length8.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialSTEEL
heat_treatmentANNEALED
basic_shape_styleROUND
criticality_code_justificationZZZX
cross_section_outside_diameter5.000 INCHES NOMINAL IN
departure_from_cited_designatorMATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
NSN9510-00-107-8299
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available NOZZLE,LUBRICATING,NONAIRCRAFT G TITLE COMPONENT PN 5 INCHES (ROUNDBAR) MFR NOZZLE,LUBRICATING,NON
KEY FEATURES
•
LENGTH: 8.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
•
HEAT TREATMENT: ANNEALED
•
CRITICALITY CODE JUSTIFICATION: ZZZX
•
BASIC SHAPE STYLE: ROUND
•
DEPARTURE FROM CITED DESIGNATOR: MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
•
CROSS SECTION OUTSIDE DIAMETER: 5.000 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
LENGTH8.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
HEAT TREATMENTANNEALED
CRITICALITY CODE JUSTIFICATIONZZZX
BASIC SHAPE STYLEROUND
DEPARTURE FROM CITED DESIGNATORMATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
CROSS SECTION OUTSIDE DIAMETER5.000 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 8
AMS-QQ-S-763Reference document
Same NSN cross-reference
Reference document — Secondary reference
QQS763L1Reference document
Same NSN cross-reference
Reference document — Secondary reference
5 INCHES (ROUNDBAR)L1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AMS-QQ-S-763L1Reference document
Same NSN cross-reference
Reference document — Secondary reference
QQ-S-763 CL304/304L COND A 5INReference document
Same NSN cross-reference
Reference document — Identification reference
SAE-AMS-QQ-S-763,CL 304, COND AReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5 INCHES (ROUNDBAR)?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5 INCHES (ROUNDBAR)?
5 INCHES (ROUNDBAR) is a NOZZLE,LUBRICATING,NONAIRCRAFT G.
What parts can replace 5 INCHES (ROUNDBAR)?
There are 8 known substitutes for 5 INCHES (ROUNDBAR): AMS-QQ-S-763, QQS763L1, 5 INCHES (ROUNDBAR)L1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5 INCHES (ROUNDBAR)?
5 INCHES (ROUNDBAR) is cataloged in the U.S. Government catalog under NSN 9510-00-107-8299. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5 INCHES (ROUNDBAR)