PartsTable
Technical Data Sheet
Download PDF

4X1132 — STUD,PLAIN

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

4X1132: STUD,PLAIN.

The STUD,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140, thread_class: 3A NUT THREAD A, thread_length: 0.750 INCHES MINIMUM NUT THREAD IN, overall_length: 1.500 INCHES NOMINAL IN, hardness_rating: 51.0 ROCKWELL C NOMINAL, thread_direction: RIGHT-HAND NUT THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5307-00-311-7918, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4X1132
NSN: 5307-00-311-7918
FSC: 5307 — Studs
CAGE: 78500 — MERITOR HEAVY VEHICLE SYSTEMS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 4140
thread_class3A NUT THREAD A
thread_length0.750 INCHES MINIMUM NUT THREAD IN
overall_length1.500 INCHES NOMINAL IN
hardness_rating51.0 ROCKWELL C NOMINAL
thread_directionRIGHT-HAND NUT THREAD
nominal_thread_size0.438 INCHES NUT THREAD IN
thread_pitch_diameters+0.3941 TO 0.3971 INCHES STUD THREAD IN
thread_quantity_per_inch20 NUT THREAD
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) STUD THREAD
material_document_and_classificationMIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5307-00-311-7918
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4X1132 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.750 INCHES MINIMUM NUT THREAD IN
•
HARDNESS RATING: 51.0 ROCKWELL C NOMINAL
•
THREAD PITCH DIAMETERS: +0.3941 TO 0.3971 INCHES STUD THREAD IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE
•
THREAD DIRECTION: RIGHT-HAND STUD THREAD
TECHNICAL CHARACTERISTICS
THREAD LENGTH0.750 INCHES MINIMUM NUT THREAD IN
THREAD LENGTH0.687 INCHES MINIMUM STUD THREAD IN
HARDNESS RATING51.0 ROCKWELL C NOMINAL
THREAD PITCH DIAMETERS+0.3941 TO 0.3971 INCHES STUD THREAD IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH1.500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND STUD THREAD
THREAD DIRECTIONRIGHT-HAND NUT THREAD
NOMINAL THREAD SIZE0.438 INCHES NUT THREAD IN
NOMINAL THREAD SIZE0.438 INCHES STUD THREAD IN
OTHER ITEMS IN FSC 5307 — Studs
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5307-00-000-6436 5307-00-001-1578 5307-00-001-1761 5307-00-001-2366 5307-00-001-4491 5307-00-001-4624 5307-00-001-4625
SUBSTITUTES & CROSS-REFERENCES 1
96MAF1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4X1132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4X1132?
4X1132 is a STUD,PLAIN.
What parts can replace 4X1132?
There is 1 known substitute for 4X1132: 96MAF1. Substitute compatibility should be verified for your specific system.
What is the NSN for 4X1132?
4X1132 is cataloged in the U.S. Government catalog under NSN 5307-00-311-7918. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4X1132