PartsTable
Technical Data Sheet
Download PDF

4T-L68110 — CUP,TAPERED ROLLER BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

4T-L68110: CUP,TAPERED ROLLER BEARING.

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, overall_width: 0.4700 INCHES NOMINAL IN, outside_diameter: 2.3280 INCHES NOMINAL IN, special_features: DUTY CLASS L SERIES, style_designator: NORMAL ANGLE, backface_corner_radius: 0.0500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-004-5095, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4T-L68110
NSN: 3110-00-004-5095
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 0LTL1 — NTN BEARING CORPORATION OF AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.4700 INCHES NOMINAL IN
outside_diameter2.3280 INCHES NOMINAL IN
special_featuresDUTY CLASS L SERIES
style_designatorNORMAL ANGLE
backface_corner_radius0.0500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-004-5095
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4T-L68110 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 2.3280 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH0.4700 INCHES NOMINAL IN
OUTSIDE DIAMETER2.3280 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0500 INCHES NOMINAL IN
SPECIAL FEATURESDUTY CLASS L SERIES
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
D0AZ1202AReference document
Same NSN cross-reference
Reference document — Secondary reference
L68110Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4T-L68110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4T-L68110?
4T-L68110 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 4T-L68110?
There are 2 known substitutes for 4T-L68110: D0AZ1202A, L68110. Substitute compatibility should be verified for your specific system.
What is the NSN for 4T-L68110?
4T-L68110 is cataloged in the U.S. Government catalog under NSN 3110-00-004-5095. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4T-L68110