PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4P94652-101A
4P94652-101A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,FRAME DRAIN is a the manufacturer industrial component. Key specifications include end_item_identification: ACFT MODEL C5, general_characteristics_item_description: 4.000 IN.O/D,1.130 IN.I/D,0.870 IN.W,6 BOLT HOLES 0.249 IN.TO 0.255 IN.DIA,FIBERGLASS REINFORCED RUBBER SILICONE IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-9375, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4P94652-101A
NSN: 5330-00-097-9375
FSC: 5330
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
end_item_identificationACFT MODEL C5
general_characteristics_item_description4.000 IN.O/D,1.130 IN.I/D,0.870 IN.W,6 BOLT HOLES 0.249 IN.TO 0.255 IN.DIA,FIBERGLASS REINFORCED RUBBER SILICONE IN
NSN5330-00-097-9375
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4P94652-101A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 4.000 IN.O/D,1.130 IN.I/D,0.870 IN.W,6 BOLT HOLES 0.249 IN.TO 0.255 IN.DIA,FIBERGLASS REINFORCED RUBBER SILICONE IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONACFT MODEL C5
GENERAL CHARACTERISTICS ITEM DESCRIPTION4.000 IN.O/D,1.130 IN.I/D,0.870 IN.W,6 BOLT HOLES 0.249 IN.TO 0.255 IN.DIA,FIBERGLASS REINFORCED RUBBER SILICONE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
6495Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-20064Interchangeable
interchangeable cross-reference
interchangeable
MILV20064Interchangeable
interchangeable cross-reference
interchangeable
CW413FPSInterchangeable
interchangeable cross-reference
interchangeable
5337-302Interchangeable
interchangeable cross-reference
interchangeable
1005427Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4P94652-101A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4P94652-101A?
4P94652-101A is a SEAL,FRAME DRAIN.
What parts can replace 4P94652-101A?
There are 12 known substitutes for 4P94652-101A: 6495, MIL-DTL-20064, MILV20064 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4P94652-101A?
4P94652-101A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-9375. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4P94652-101A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026