PartsTable
Technical Data Sheet
Download PDF

4N8948 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4N8948: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE AND TAPERED, first_leg_width: 9.500 INCHES NOMINAL IN, first_leg_length: 3.844 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-147-4097, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4N8948
NSN: 5340-01-147-4097
FSC: 5340 — Hardware, Commercial
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE AND TAPERED
first_leg_width9.500 INCHES NOMINAL IN
first_leg_length3.844 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width9.500 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length3.940 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_end_width4.220 INCHES NOMINAL IN
first_leg_thickness0.560 INCHES NOMINAL IN
NSN5340-01-147-4097
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4N8948 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 2.250 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.312 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 9.500 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 3.940 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH2.250 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.688 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH2.312 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.688 INCHES NOMINAL IN
SECOND LEG WIDTH9.500 INCHES NOMINAL IN
SECOND LEG LENGTH3.940 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
FIRST LEG END WIDTH4.220 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4N8948?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4N8948?
4N8948 is a BRACKET,ANGLE.
What is the NSN for 4N8948?
4N8948 is cataloged in the U.S. Government catalog under NSN 5340-01-147-4097. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4N8948

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.