PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4M95C04-4
4M95C04-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.500 INCHES NOMINAL IN, material: STEEL COMP 303 LOCATION NOT OTHERWISE SPECIFIED, style_designator: INTERNALLY THREADED FULL LENGTH, surface_treatment: PASSIVATE OVERALL, width_across_flats: 0.187 INCHES NOMINAL IN, cross-sectional_shape: HEXAGON. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-817-4708, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4M95C04-4
NSN: 5340-00-817-4708
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
length0.500 INCHES NOMINAL IN
materialSTEEL COMP 303 LOCATION NOT OTHERWISE SPECIFIED
style_designatorINTERNALLY THREADED FULL LENGTH
surface_treatmentPASSIVATE OVERALL
width_across_flats0.187 INCHES NOMINAL IN
cross-sectional_shapeHEXAGON
material_document_and_classificationASTM A582, TYPE 303 COND A ASSN STD SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5340-00-817-4708
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4M95C04-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 303 LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582, TYPE 303 COND A ASSN STD SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
WIDTH ACROSS FLATS: 0.187 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 303 LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORINTERNALLY THREADED FULL LENGTH
SURFACE TREATMENTPASSIVATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582, TYPE 303 COND A ASSN STD SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
WIDTH ACROSS FLATS0.187 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
868C934P3Interchangeable
interchangeable cross-reference
interchangeable
5017M86P04Interchangeable
interchangeable cross-reference
interchangeable
868C934P2Interchangeable
interchangeable cross-reference
interchangeable
S07-3Interchangeable
Same NIIN cross-reference
interchangeable
NAS1786C04-08Interchangeable
Same NIIN cross-reference
interchangeable
860314-62Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4M95C04-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4M95C04-4?
4M95C04-4 is a STANDOFF,THREADED,SPACING.
What parts can replace 4M95C04-4?
There are 11 known substitutes for 4M95C04-4: 868C934P3, 5017M86P04, 868C934P2 and 8 more. Substitute compatibility should be verified for your specific system.
Is 4M95C04-4 still available?
4M95C04-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4M95C04-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026