4M49A4DL8-3: SPACER,PLATE.
The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, hole_diameter: 0.356 INCHES MINIMUM AND 0.366 INCHES MAXIMUM IN, overall_width: 0.486 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, overall_length: 3.280 INCHES NOMINAL IN, special_features: 2 HOLES ARE .750 TO 1.000 FROM CENTER HOLE, AND BOTH ENDS ARE CUT OFF FROM CENTER OF END HOLES AFTER 0.38 +0 -.03, style_designator: NON-CIRCULAR W/SQUARE CORNERS. This part is cataloged in the U.S.
Government catalog under NSN 5365-00-231-4909, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 2024 |
| hole_diameter | 0.356 INCHES MINIMUM AND 0.366 INCHES MAXIMUM IN |
| overall_width | 0.486 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| overall_length | 3.280 INCHES NOMINAL IN |
| special_features | 2 HOLES ARE .750 TO 1.000 FROM CENTER HOLE, AND BOTH ENDS ARE CUT OFF FROM CENTER OF END HOLES AFTER 0.38 +0 -.03 |
| style_designator | NON-CIRCULAR W/SQUARE CORNERS |
| overall_thickness | 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| bolt_hole_quantity | 3 |
| material_document_and_classification | QQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE |
| bolt_hole_centerline_to_nearest_edge_distance | 0.243 INCHES MINIMUM AND 0.258 INCHES MAXIMUM IN |
| surface_treatment_document_and_classification | MIL-F-7179 MIL SPEC SINGLE TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| outside_edge_to_bolt_hole_center_distance_along_length | 0.640 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN |
| NSN | 5365-00-231-4909 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-7179 MIL SPEC SINGLE TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| OVERALL THICKNESS | 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 3.280 INCHES NOMINAL IN |
| OVERALL WIDTH | 0.486 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.243 INCHES MINIMUM AND 0.258 INCHES MAXIMUM IN |
| BOLT HOLE QUANTITY | 3 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| SPECIAL FEATURES | 2 HOLES ARE .750 TO 1.000 FROM CENTER HOLE, AND BOTH ENDS ARE CUT OFF FROM CENTER OF END HOLES AFTER 0.38 +0 -.03 |
No substitute or cross-reference records for this part.