4M49A3DM11P13: SPACER,PLATE.
The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, hole_diameter: 0.286 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN, overall_width: 0.386 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR W/SQUARE CORNERS, overall_thickness: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, surface_treatment: CHROMATE AND PRIMER. This part is cataloged in the U.S.
Government catalog under NSN 5365-01-535-5802, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY |
| hole_diameter | 0.286 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN |
| overall_width | 0.386 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN |
| special_features | CUTOFF 'C', BOTH ENDS;FINISH, CONVERSION COAT PER MIL-C-5541 PLUS TWO COATS OF MIL-P-85582, TY I, CL 2, PRIMER APPLIED PER MIL-F-7179;48 INCH STOCK LENGTHS ARE STANDARD IN |
| style_designator | NON-CIRCULAR W/SQUARE CORNERS |
| overall_thickness | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN |
| surface_treatment | CHROMATE AND PRIMER |
| bolt_hole_quantity | 13 |
| end_item_identification | F15E LH/RH AV |
| material_document_and_classification | QQ-A-2505/5, T3 FED SPEC SINGLE MATERIAL RESPONSE |
| part_name_assigned_by_controlling_agency | SHIM, GANG CHANNEL |
| bolt_hole_centerline_to_nearest_edge_distance | 0.198 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN |
| NSN | 5365-01-535-5802 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE AND MIL-P-85582, TY I, CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| OVERALL THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-2505/5, T3 FED SPEC SINGLE MATERIAL RESPONSE |
| OVERALL WIDTH | 0.386 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN |
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.198 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN |
| BOLT HOLE QUANTITY | 13 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.375 INCHES NOMINAL IN |
| SPECIAL FEATURES | CUTOFF 'C', BOTH ENDS;FINISH, CONVERSION COAT PER MIL-C-5541 PLUS TWO COATS OF MIL-P-85582, TY I, CL 2, PRIMER APPLIED PER MIL-F-7179;48 INCH STOCK LENGTHS ARE STANDARD IN |
| SURFACE TREATMENT | CHROMATE AND PRIMER |
No substitute or cross-reference records for this part.