PartsTable
Technical Data Sheet
Download PDF

4M36-02117 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4M36-02117: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, thickness: 0.063 INCHES NOMINAL IN, hole_diameter: 0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN, overall_diameter: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-133-1107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4M36-02117
NSN: 5310-01-133-1107
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
thickness0.063 INCHES NOMINAL IN
hole_diameter0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN
overall_diameter0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-S-18729,COND A MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758,COND C MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-T-6736,TYPE 1,COND N MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-133-1107
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4M36-02117 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18729,COND A MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758,COND C MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-T-6736,TYPE 1,COND N MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 4130 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18729,COND A MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758,COND C MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-T-6736,TYPE 1,COND N MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 4130 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN
THICKNESS0.063 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
10109673Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4M36-02117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4M36-02117?
4M36-02117 is a WASHER,FLAT.
What parts can replace 4M36-02117?
There is 1 known substitute for 4M36-02117: 10109673. Substitute compatibility should be verified for your specific system.
What is the NSN for 4M36-02117?
4M36-02117 is cataloged in the U.S. Government catalog under NSN 5310-01-133-1107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4M36-02117

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.