PartsTable
Technical Data Sheet
Download PDF

4M36-01060 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4M36-01060: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, thickness: 0.090 INCHES NOMINAL IN, hole_diameter: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, overall_diameter: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-641-9202, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4M36-01060
NSN: 5310-00-641-9202
NIINs: 006419202, 013398448
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
thickness0.090 INCHES NOMINAL IN
hole_diameter0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
overall_diameter0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-641-9202
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4M36-01060 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 301 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATIONAV-8B AIRCRAFT
MATERIALSTEEL COMP 301 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
THICKNESS0.063 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
75A325416-2003Reference document
Same NSN cross-reference
Reference document — Secondary reference
03A250D20E60Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4M36-01060?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4M36-01060?
4M36-01060 is a WASHER,FLAT.
What parts can replace 4M36-01060?
There are 2 known substitutes for 4M36-01060: 75A325416-2003, 03A250D20E60. Substitute compatibility should be verified for your specific system.
What is the NSN for 4M36-01060?
4M36-01060 is cataloged in the U.S. Government catalog under NSN 5310-00-641-9202. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4M36-01060

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.