4M340-150 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

4M340-150: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, stud_length: 1.5000 INCHES NOMINAL IN, thread_class: 2A A, stud_diameter: 0.8750 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN, thread_length: 0.7500 INCHES NOMINAL IN, overall_length: 2.4060 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-286-6144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

4M340-150

NSN: 3110-01-286-6144
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 92563 — MCGILL MANUFACTURING CO, INC (USA)

SPECIFICATIONS

material	STEEL COMP E52100 OUTER RING
stud_length	1.5000 INCHES NOMINAL IN
thread_class	2A A
seal_quantity	2
stud_diameter	0.8750 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN
thread_length	0.7500 INCHES NOMINAL IN
overall_length	2.4060 INCHES NOMINAL IN
outer_ring_width	0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
special_features	80 PCT FULL OF SPECIFIED LUBRICANT; PLUG TO BE SUPPLIED TO CLOSE OFF UNUSED LUBE HOLE IN END OF SHANK; CROWNED OD
style_designator	CAM FOLLOWER
thread_direction	RIGHT-HAND
bearing_seal_type	CONTACT
NSN	3110-01-286-6144

COMPONENT DIAGRAM

KEY FEATURES

•

BEARING SEAL TYPE: CONTACT

•

LUBRICATION MATERIAL: GREASE

•

OUTER RING WIDTH: 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING

•

THREAD LENGTH: 0.7500 INCHES NOMINAL IN

•

STYLE DESIGNATOR: CAM FOLLOWER

•

MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING

TECHNICAL CHARACTERISTICS

BEARING SEAL TYPE	CONTACT
LUBRICATION MATERIAL	GREASE
OUTER RING WIDTH	0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER
THREAD LENGTH	0.7500 INCHES NOMINAL IN
STYLE DESIGNATOR	CAM FOLLOWER
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE STUD

OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722

SUBSTITUTES & CROSS-REFERENCES 2

CCFH1-1/2S-CPReference document

Same NSN cross-reference

Reference document — Secondary reference

HR-1-1/2-XC-CCP-43Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 4M340-150?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 4M340-150?

4M340-150 is a CAM FOLLOWER,NEEDLE BEARING.

What parts can replace 4M340-150?

There are 2 known substitutes for 4M340-150: CCFH1-1/2S-CP, HR-1-1/2-XC-CCP-43. Substitute compatibility should be verified for your specific system.

What is the NSN for 4M340-150?

4M340-150 is cataloged in the U.S. Government catalog under NSN 3110-01-286-6144. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

4M340-150 — CAM FOLLOWER,NEEDLE BEARING

Request a Quote — 4M340-150