PartsTable
Technical Data Sheet
Download PDF

4M30C516-064 — NUT SPACER,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4M30C516-064: NUT SPACER,PLATE.

The NUT SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, nut_style: PLATE NUT SPACER, nut_length: 0.922 INCHES NOMINAL IN, plate_thickness: 0.064 INCHES NOMINAL IN, surface_treatment: ANODIZE OR OXIDE FILM OVERALL, thru-hole_diameter: 0.322 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-364-9573, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4M30C516-064
NSN: 5310-00-364-9573
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
nut_stylePLATE NUT SPACER
nut_length0.922 INCHES NOMINAL IN
plate_thickness0.064 INCHES NOMINAL IN
surface_treatmentANODIZE OR OXIDE FILM OVERALL
thru-hole_diameter0.322 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
mounting_hole_diameter0.129 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
nut_mounting_provisionSTRAIGHT HOLES
mounting_hole_arrangement_style2 HOLES
material_document_and_classificationQQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 FED SPEC 2ND TREATMENT RESPONSE OVERALL
distance_from_aperture_center_to_mounting_hole_center0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
NSN5310-00-364-9573
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4M30C516-064 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.064 INCHES NOMINAL IN
•
NUT LENGTH: 0.922 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER: 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
•
THRU-HOLE DIAMETER: 0.322 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.064 INCHES NOMINAL IN
NUT LENGTH0.922 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 FED SPEC 2ND TREATMENT RESPONSE OVERALL
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.129 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
THRU-HOLE DIAMETER0.322 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OR OXIDE FILM OVERALL
NUT STYLEPLATE NUT SPACER
SUBSTITUTES & CROSS-REFERENCES 1
10121323Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 4M30C516-064?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4M30C516-064?
4M30C516-064 is a NUT SPACER,PLATE.
What parts can replace 4M30C516-064?
There is 1 known substitute for 4M30C516-064: 10121323. Substitute compatibility should be verified for your specific system.
What is the NSN for 4M30C516-064?
4M30C516-064 is cataloged in the U.S. Government catalog under NSN 5310-00-364-9573. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4M30C516-064

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.