4M264-4 — WASHER,FINISHING

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

4M264-4: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, recess_angle: 100.0 DEGREES NOMINAL, hole_diameter: 0.375 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN, overall_height: 0.216 INCHES NOMINAL IN, recess_diameter: 0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN, outside_diameter: 0.885 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-131-2263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

4M264-4

NSN: 5310-01-131-2263
FSC: 5310 — Nuts and Washers
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
recess_angle	100.0 DEGREES NOMINAL
hole_diameter	0.375 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
overall_height	0.216 INCHES NOMINAL IN
recess_diameter	0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
outside_diameter	0.885 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
style_designator	FINISHING
material_thickness	0.020 INCHES NOMINAL IN
material_document_and_classification	MIL-T-9047,COMP 6-6A1-4V MIL SPEC SINGLE MATERIAL RESPONSE OVERALL V
NSN	5310-01-131-2263

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: FINISHING

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-T-9047,COMP 6-6A1-4V MIL SPEC SINGLE MATERIAL RESPONSE OVERALL V

•

OUTSIDE DIAMETER: 0.885 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN

•

RECESS DIAMETER: 0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN

•

MATERIAL: TITANIUM ALLOY OVERALL

•

HOLE DIAMETER: 0.375 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.216 INCHES NOMINAL IN
STYLE DESIGNATOR	FINISHING
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-T-9047,COMP 6-6A1-4V MIL SPEC SINGLE MATERIAL RESPONSE OVERALL V
OUTSIDE DIAMETER	0.885 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.020 INCHES NOMINAL IN
RECESS DIAMETER	0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
MATERIAL	TITANIUM ALLOY OVERALL
HOLE DIAMETER	0.375 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
RECESS ANGLE	100.0 DEGREES NOMINAL

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 2

AM264V4Reference document

Same NSN cross-reference

Reference document — Secondary reference

4M264V4Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 4M264-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 4M264-4?

4M264-4 is a WASHER,FINISHING.

What parts can replace 4M264-4?

There are 2 known substitutes for 4M264-4: AM264V4, 4M264V4. Substitute compatibility should be verified for your specific system.

What is the NSN for 4M264-4?

4M264-4 is cataloged in the U.S. Government catalog under NSN 5310-01-131-2263. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

4M264-4 — WASHER,FINISHING

Request a Quote — 4M264-4