PartsTable
Technical Data Sheet
Download PDF

4J12115-113A — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4J12115-113A: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include minor_height: 0.140 INCHES NOMINAL IN, overall_length: 17.80 INCHES NOMINAL IN, special_features: STRIP AERODYN SEAL FIXED LE/SLAT/NHA:4J11018, cross-sectional_width: 0.400 INCHES NOMINAL IN, cross-sectional_height: 0.180 INCHES NOMINAL IN, end_item_identification: C-5 AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-698-4634, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4J12115-113A
NSN: 5330-01-698-4634
FSC: 5330 — Packing and Gasket Materials
CAGE: 17772 — AERO ENGINEERING & MANUFACTURING COMPANY OF CALIFORNIA, LLC DBA AEROENGINEERING & MANUFACTURING CO (USA)
SPECIFICATIONS
minor_height0.140 INCHES NOMINAL IN
overall_length17.80 INCHES NOMINAL IN
special_featuresSTRIP AERODYN SEAL FIXED LE/SLAT/NHA:4J11018
cross-sectional_width0.400 INCHES NOMINAL IN
cross-sectional_height0.180 INCHES NOMINAL IN
end_item_identificationC-5 AIRCRAFT
material_document_and_classificationL-P-410 MFR REF SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencySTRIP,AERO SEAL
NSN5330-01-698-4634
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4J12115-113A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.180 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.400 INCHES NOMINAL IN
•
MINOR HEIGHT: 0.140 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410 MFR REF SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.180 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.400 INCHES NOMINAL IN
MINOR HEIGHT0.140 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-410 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH17.80 INCHES NOMINAL IN
SPECIAL FEATURESSTRIP AERODYN SEAL FIXED LE/SLAT/NHA:4J11018
PART NAME ASSIGNED BY CONTROLLING AGENCYSTRIP,AERO SEAL
END ITEM IDENTIFICATIONC-5 AIRCRAFT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4J12115-113A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4J12115-113A?
4J12115-113A is a SEAL,NONMETALLIC STRIP.
What is the NSN for 4J12115-113A?
4J12115-113A is cataloged in the U.S. Government catalog under NSN 5330-01-698-4634. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4J12115-113A