PartsTable
Technical Data Sheet
Download PDF

4HR196 — PLUG,ADJUSTING,BALL STUD

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

4HR196: PLUG,ADJUSTING,BALL STUD.

The PLUG,ADJUSTING,BALL STUD is a the manufacturer industrial component. Key specifications include depth: 0.500 INCHES NOMINAL IN, diameter: 1.031 INCHES NOMINAL IN, material: STEEL, slot_depth: 0.469 INCHES NOMINAL IN, slot_width: 0.265 INCHES NOMINAL IN, overall_length: 1.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 2530-00-117-9147, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4HR196
NSN: 2530-00-117-9147
FSC: 2530 — Vehicular Brake, Steering, Axle, Wheel, and Track Components
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
depth0.500 INCHES NOMINAL IN
diameter1.031 INCHES NOMINAL IN
materialSTEEL
slot_depth0.469 INCHES NOMINAL IN
slot_width0.265 INCHES NOMINAL IN
overall_length1.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
fsc_application_dataPLUG,ADJUSTING,BALL STUD TIE ROD END,STEERING,VEHICULAR
ball_seat_end_characteristicFLAT AND DRILLED
lubrication_fitting_threaded_holeNOT INCLUDED
thread_size_and_series/type_designator1-27/32-14,UNS
NSN2530-00-117-9147
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available PLUG,ADJUSTING,BALL STUD TITLE COMPONENT PN 4HR196 MFR PLUG,ADJUSTING,BALL ST
KEY FEATURES
•
FSC APPLICATION DATA: PLUG,ADJUSTING,BALL STUD TIE ROD END,STEERING,VEHICULAR
•
BALL SEAT END CHARACTERISTIC: FLAT AND DRILLED
•
DIAMETER: 1.031 INCHES NOMINAL IN
•
LUBRICATION FITTING THREADED HOLE: NOT INCLUDED
•
THREAD DIRECTION: RIGHT-HAND
•
SLOT DEPTH: 0.469 INCHES NOMINAL IN
•
DEPTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAPLUG,ADJUSTING,BALL STUD TIE ROD END,STEERING,VEHICULAR
BALL SEAT END CHARACTERISTICFLAT AND DRILLED
DIAMETER1.031 INCHES NOMINAL IN
OVERALL LENGTH1.375 INCHES NOMINAL IN
LUBRICATION FITTING THREADED HOLENOT INCLUDED
THREAD DIRECTIONRIGHT-HAND
SLOT DEPTH0.469 INCHES NOMINAL IN
DEPTH0.500 INCHES NOMINAL IN
MATERIALSTEEL
SLOT WIDTH0.265 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
403434Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4HR196?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4HR196?
4HR196 is a PLUG,ADJUSTING,BALL STUD.
What parts can replace 4HR196?
There is 1 known substitute for 4HR196: 403434. Substitute compatibility should be verified for your specific system.
What is the NSN for 4HR196?
4HR196 is cataloged in the U.S. Government catalog under NSN 2530-00-117-9147. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4HR196

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.