PartsTable
Technical Data Sheet
Download PDF

4F73504-101A — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4F73504-101A: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 1.580 INCHES NOMINAL IN, first_leg_length: 0.900 INCHES NOMINAL IN, second_leg_style: ANGLE, second_leg_width: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-044-0112, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4F73504-101A
NSN: 5340-01-044-0112
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width1.580 INCHES NOMINAL IN
first_leg_length0.900 INCHES NOMINAL IN
second_leg_styleANGLE
second_leg_width0.750 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.300 INCHES NOMINAL IN
first_leg_thickness0.135 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
first_leg_end_radius0.350 INCHES NOMINAL IN
second_leg_end_width0.300 INCHES NOMINAL IN
second_leg_thickness0.100 INCHES NOMINAL IN
NSN5340-01-044-0112
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4F73504-101A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.460 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.460 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.156 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.263 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.750 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.460 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.460 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.156 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.256 INCHES MINIMUM AND 0.263 INCHES MAXIMUM IN
SECOND LEG WIDTH0.750 INCHES NOMINAL IN
SECOND LEG LENGTH1.300 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETHREE HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.440 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4F73504-101A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4F73504-101A?
4F73504-101A is a BRACKET,ANGLE.
What is the NSN for 4F73504-101A?
4F73504-101A is cataloged in the U.S. Government catalog under NSN 5340-01-044-0112. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4F73504-101A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.