PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4F59325-113A
4F59325-113A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYIMIDE OVERALL, overall_width: 3.000 INCHES NOMINAL IN, overall_length: 132.000 INCHES NOMINAL IN, surface_treatment: RUBBER SILICONE CLASS Q OVERALL, cross-sectional_thickness: 0.009 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-280-5822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4F59325-113A
NSN: 5330-01-280-5822
FSC: 5330
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialPLASTIC POLYIMIDE OVERALL
overall_width3.000 INCHES NOMINAL IN
overall_length132.000 INCHES NOMINAL IN
surface_treatmentRUBBER SILICONE CLASS Q OVERALL
cross-sectional_thickness0.009 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-280-5822
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4F59325-113A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.009 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYIMIDE OVERALL
•
SURFACE TREATMENT: RUBBER SILICONE CLASS Q OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.009 INCHES NOMINAL IN
MATERIALPLASTIC POLYIMIDE OVERALL
OVERALL WIDTH3.000 INCHES NOMINAL IN
OVERALL LENGTH132.000 INCHES NOMINAL IN
SURFACE TREATMENTRUBBER SILICONE CLASS Q OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
23-816Interchangeable
interchangeable cross-reference
interchangeable
12720Interchangeable
interchangeable cross-reference
interchangeable
2-301Interchangeable
interchangeable cross-reference
interchangeable
AAA-W-200Interchangeable
interchangeable cross-reference
interchangeable
ST3M588-6Interchangeable
interchangeable cross-reference
interchangeable
460V0868Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4F59325-113A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4F59325-113A?
4F59325-113A is a GASKET.
What parts can replace 4F59325-113A?
There are 7 known substitutes for 4F59325-113A: 23-816, 12720, 2-301 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4F59325-113A?
4F59325-113A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-280-5822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4F59325-113A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026