PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4E13872
4E13872 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: RECESSED, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 4.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.437 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-695-1359, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4E13872
NSN: 5330-00-695-1359
FSC: 5330
CAGE: 99832 — SCOTT HUBER ESSICK A CO OF FIGGIE INTERNATIONAL INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleRECESSED
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter4.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.437 INCHES NOMINAL IN
NSN5330-00-695-1359
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4E13872 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 3.437 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 4.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER3.437 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER4.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.500 INCHES NOMINAL IN
CASE STYLERECESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
1-300-235-02Interchangeable
interchangeable cross-reference
interchangeable
514246Interchangeable
interchangeable cross-reference
interchangeable
14362AInterchangeable
interchangeable cross-reference
interchangeable
14739AInterchangeable
interchangeable cross-reference
interchangeable
840691Interchangeable
interchangeable cross-reference
interchangeable
4-49316Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4E13872?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4E13872?
4E13872 is a SEAL,PLAIN ENCASED.
What parts can replace 4E13872?
There are 8 known substitutes for 4E13872: 1-300-235-02, 514246, 14362A and 5 more. Substitute compatibility should be verified for your specific system.
Is 4E13872 still available?
4E13872 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4E13872

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026