PartsTable
Technical Data Sheet
Download PDF

4D3-0102-0304 — SLEEVE,SEAL,COUPLER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4D3-0102-0304: SLEEVE,SEAL,COUPLER.

The SLEEVE,SEAL,COUPLER is a the manufacturer industrial component. Key specifications include material: COTTON AND GLASS OR COTTON AND GLASS AND RUBBER SILICONE CLASS Q OVERALL, fsc_application_data: CONNECTOR,HEAT AND VENT DUCT,AIRCRAFT, cross-sectional_length: 3.250 INCHES NOMINAL IN, cross_section_inside_diameter: 1.125 INCHES NOMINAL IN, cross_section_outside_diameter: 1.305 INCHES NOMINAL IN, material_document_and_classification: ECC-128 FSCM 43999 MFR REF 1ST MATERIAL RESPONSE OR ECC-164 FSCM 43999 MFR REF 2ND MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-729-4167, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4D3-0102-0304
NSN: 5330-00-729-4167
FSC: 5330 — Packing and Gasket Materials
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
materialCOTTON AND GLASS OR COTTON AND GLASS AND RUBBER SILICONE CLASS Q OVERALL
fsc_application_dataCONNECTOR,HEAT AND VENT DUCT,AIRCRAFT
cross-sectional_length3.250 INCHES NOMINAL IN
cross_section_inside_diameter1.125 INCHES NOMINAL IN
cross_section_outside_diameter1.305 INCHES NOMINAL IN
material_document_and_classificationECC-128 FSCM 43999 MFR REF 1ST MATERIAL RESPONSE OR ECC-164 FSCM 43999 MFR REF 2ND MATERIAL RESPONSE OVERALL
NSN5330-00-729-4167
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4D3-0102-0304 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: CONNECTOR,HEAT AND VENT DUCT,AIRCRAFT
•
MATERIAL DOCUMENT AND CLASSIFICATION: ECC-128 FSCM 43999 MFR REF 1ST MATERIAL RESPONSE OR ECC-164 FSCM 43999 MFR REF 2ND MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL LENGTH: 3.250 INCHES NOMINAL IN
•
CROSS SECTION INSIDE DIAMETER: 1.125 INCHES NOMINAL IN
•
CROSS SECTION OUTSIDE DIAMETER: 1.305 INCHES NOMINAL IN
•
MATERIAL: COTTON AND GLASS OR COTTON AND GLASS AND RUBBER SILICONE CLASS Q OVERALL
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATACONNECTOR,HEAT AND VENT DUCT,AIRCRAFT
MATERIAL DOCUMENT AND CLASSIFICATIONECC-128 FSCM 43999 MFR REF 1ST MATERIAL RESPONSE OR ECC-164 FSCM 43999 MFR REF 2ND MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL LENGTH3.250 INCHES NOMINAL IN
CROSS SECTION INSIDE DIAMETER1.125 INCHES NOMINAL IN
CROSS SECTION OUTSIDE DIAMETER1.305 INCHES NOMINAL IN
MATERIALCOTTON AND GLASS OR COTTON AND GLASS AND RUBBER SILICONE CLASS Q OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4D3-0102-0304?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4D3-0102-0304?
4D3-0102-0304 is a SLEEVE,SEAL,COUPLER.
What is the NSN for 4D3-0102-0304?
4D3-0102-0304 is cataloged in the U.S. Government catalog under NSN 5330-00-729-4167. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4D3-0102-0304