PartsTable
Technical Data Sheet
Download PDF

4D0072-1R — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

4D0072-1R: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 310 SHIELD, shank_style: EXTERNALLY THREADED W/SLOT, thread_class: 3A A, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, overall_length: 2.6250 INCHES MINIMUM AND 2.6550 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-461-1576, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4D0072-1R
NSN: 3110-01-461-1576
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 88277 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 310 SHIELD
shank_styleEXTERNALLY THREADED W/SLOT
thread_class3A A
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
alignment_typeSELF-ALIGNING
overall_length2.6250 INCHES MINIMUM AND 2.6550 INCHES MAXIMUM IN
shank_diameter0.2500 INCHES NOMINAL IN
shield_quantity2
inner_ring_width0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
outer_ring_width0.3500 INCHES MINIMUM IN
special_featuresKEYWAY SHANK
style_designatorSINGLE ROW, CONCAVE ROLLERS
NSN3110-01-461-1576
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4D0072-1R · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.2500 INCHES NOMINAL IN
•
SHANK THREAD LENGTH: 1.6250 INCHES MINIMUM AND 1.6850 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL: LUBRICANT
•
OUTER RING WIDTH: 0.3500 INCHES MINIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE 1, CLASS 2 FED SPEC 1ST TREATMENT RESPONSE ROD END BODY
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: SINGLE ROW, CONCAVE ROLLERS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.2500 INCHES NOMINAL IN
SHANK THREAD LENGTH1.6250 INCHES MINIMUM AND 1.6850 INCHES MAXIMUM IN
LUBRICATION MATERIALLUBRICANT
OUTER RING WIDTH0.3500 INCHES MINIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE 1, CLASS 2 FED SPEC 1ST TREATMENT RESPONSE ROD END BODY
INTERNAL FIT-UP DESIGNATIONSTANDARD
SHIELD QUANTITY2
STYLE DESIGNATORSINGLE ROW, CONCAVE ROLLERS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE ROD END BODY
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE ROLLER
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
42121-146Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4D0072-1R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4D0072-1R?
4D0072-1R is a BEARING,BALL,ROD END.
What parts can replace 4D0072-1R?
There is 1 known substitute for 4D0072-1R: 42121-146. Substitute compatibility should be verified for your specific system.
What is the NSN for 4D0072-1R?
4D0072-1R is cataloged in the U.S. Government catalog under NSN 3110-01-461-1576. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4D0072-1R

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.