PartsTable
Technical Data Sheet
PartsTable / MRO / 49962
49962 ✓ Verified by PartsTable
Zebra · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Zebra's replacement parts and printheads are quality components made to Zebra's exacting engineering standards. These cost-effective components ensure that your printer will continue to provide the quality, reliability, and performance you expect.<br><br><b>Quality</b><br>Stamped from the same tools and dies as the originals, Zebra replacement parts and printheads are thoroughly inspected to ensure that they fit just as precisely as the originals. They are made from the same high-quality materials to provide superior performance and protection against wear.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-526-7679, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 49962
NSN: 5330-00-526-7679
FSC: 5330
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
colorBLACK
materialNICKEL ALLOY
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
section_quantity1
peripheral_diameter0.280 INCHES NOMINAL IN
center_hole_diameter0.160 INCHES NOMINAL IN
fsc_application_dataENGINE,ACFT,RECIPROCATING
reliability_indicatorNOT ESTABLISHED
cross-sectional_height0.120 INCHES NOMINAL IN
cross-sectional_shape_styleOVAL
material_document_and_classificationAMS 3222 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-526-7679
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 49962 MFR: Zebra ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.120 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.160 INCHES NOMINAL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
PERIPHERAL DIAMETER: 0.280 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: OVAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3222 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
COLOR: BLACK
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.120 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.160 INCHES NOMINAL IN
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
PERIPHERAL DIAMETER0.280 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEOVAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3222 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
COLORBLACK
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
FSC APPLICATION DATAENGINE,ACFT,RECIPROCATING
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
49962Interchangeable
interchangeable cross-reference
interchangeable
49881Interchangeable
interchangeable cross-reference
interchangeable
49962EInterchangeable
interchangeable cross-reference
interchangeable
49881 PIECE 27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 49962?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 49962?
49962 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Zebra. It is classified as a MRO (MRO_GENERAL).
What parts can replace 49962?
There are 4 known substitutes for 49962: 49962, 49881, 49962E and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 49962?
49962 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-526-7679. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 49962

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026