PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4995604
4995604 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

ROCKER ARM ASSEMBLY,ENGINE POPPE. Key specifications include special_features: KNOWN AS; ROCKER ARM, ENGINE, end_item_identification: ISB 07 ENGINE; MEDIUM MINE PROTECTED VEHICLE - MMPV, engine_design_control_activity: 15434, engine_model_number_for_which_designed: ISB 07 ENGINE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-017-1535, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4995604
NSN: 5330-01-017-1535
FSC: 5330
CAGE: 99657 — MAROTTA CONTROLS INC (USA)
SPECIFICATIONS
special_featuresKNOWN AS; ROCKER ARM, ENGINE
end_item_identificationISB 07 ENGINE; MEDIUM MINE PROTECTED VEHICLE - MMPV
engine_design_control_activity15434
engine_model_number_for_which_designedISB 07 ENGINE
NSN5330-01-017-1535
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4995604 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIAL TEST FEATURES: DRILL 4 VENT HOLES NO. 72 /0.025 IN. DIA/,LOCATED AT 90 DEGREE AROUND CIRCLE,2 HOLES ON EACH SIDE AT 180 DEGREES APART IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: STEEL COMP 321 OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.095 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
•
SURFACE TREATMENT: SILVER OVERALL
•
APERTURE DIAMETER: 1.169 INCHES MINIMUM AND 1.201 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.377 INCHES MINIMUM AND 1.383 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL TEST FEATURESDRILL 4 VENT HOLES NO. 72 /0.025 IN. DIA/,LOCATED AT 90 DEGREE AROUND CIRCLE,2 HOLES ON EACH SIDE AT 180 DEGREES APART IN
STYLE DESIGNATORCIRCULAR
MATERIALSTEEL COMP 321 OVERALL
CROSS-SECTIONAL THICKNESS0.095 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
SURFACE TREATMENTSILVER OVERALL
APERTURE DIAMETER1.169 INCHES MINIMUM AND 1.201 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.377 INCHES MINIMUM AND 1.383 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEHOLLOW
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CL 321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
2042-1Interchangeable
interchangeable cross-reference
interchangeable
X2042AInterchangeable
interchangeable cross-reference
interchangeable
245004Interchangeable
interchangeable cross-reference
interchangeable
RM611Interchangeable
interchangeable cross-reference
interchangeable
8513216Interchangeable
interchangeable cross-reference
interchangeable
AMES-2042-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4995604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4995604?
4995604 is a ROCKER ARM ASSEMBLY,ENGINE POPPE.
What parts can replace 4995604?
There are 15 known substitutes for 4995604: 2042-1, X2042A, 245004 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4995604?
4995604 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-017-1535. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4995604

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026