PartsTable
Technical Data Sheet
Download PDF

49915 — TARGET DETECTING DEVICE,FUZE

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

49915: TARGET DETECTING DEVICE,FUZE.

- Case for storing SD memory cards - Includes an elastic, shock absorbing insert - Holds up to SD memory cards. Key specifications include special_features: USED WITH REFRIGERANT R-410A A, supplementary_features: COMES WITH 5/16 - 3/8 - 1/4 - 5/16 INCH ANCHOR FITTINGS AND 1/4 - 3/8 - 1/4 - 1/4 INCH SERVICE FITTINGS. IN, part_name_assigned_by_controlling_agency: MANIFOLD.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-291-1653, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
49915
NSN: 5330-00-291-1653
NIINs: 002911653, 005016010, 010477132, 011624394, 016279384
FSC: 5330 — Packing and Gasket Materials
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
special_featuresUSED WITH REFRIGERANT R-410A A
supplementary_featuresCOMES WITH 5/16 - 3/8 - 1/4 - 5/16 INCH ANCHOR FITTINGS AND 1/4 - 3/8 - 1/4 - 1/4 INCH SERVICE FITTINGS. IN
part_name_assigned_by_controlling_agencyMANIFOLD
NSN5330-00-291-1653
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 49915 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 5.374 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 4.000 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER5.374 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER4.000 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 6
43-1344Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
ASD1602Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A1205T436Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
61174Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
989409Reference document
Same NSN cross-reference
Reference document — Secondary reference
55512Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 49915?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 49915?
49915 is a TARGET DETECTING DEVICE,FUZE manufactured by Hama.
What parts can replace 49915?
There are 6 known substitutes for 49915: 43-1344, ASD1602, A1205T436 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 49915?
49915 is cataloged in the U.S. Government catalog under NSN 5330-00-291-1653. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 49915