PartsTable
Technical Data Sheet
Download PDF

49688-01X6PC17 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

49688-01X6PC17: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_diameter: 190.00 MILLIMETERS MAXIMUM MM, inner_ring_width: 1.2790 INCHES MINIMUM AND 1.2990 INCHES MAXIMUM IN, outer_ring_width: 29.00 MILLIMETERS MAXIMUM MM, special_features: OUTER RING STANDOUT OF 0.005 IN.ON SIDE OF INNER RING BREAKOUT IN, overall_outside_diameter: 255.00 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-498-6752, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
49688-01X6PC17
NSN: 3110-00-498-6752
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
bore_diameter190.00 MILLIMETERS MAXIMUM MM
inner_ring_width1.2790 INCHES MINIMUM AND 1.2990 INCHES MAXIMUM IN
outer_ring_width29.00 MILLIMETERS MAXIMUM MM
special_featuresOUTER RING STANDOUT OF 0.005 IN.ON SIDE OF INNER RING BREAKOUT IN
overall_outside_diameter255.00 MILLIMETERS MAXIMUM MM
NSN3110-00-498-6752
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 49688-01X6PC17 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 29.00 MILLIMETERS MAXIMUM MM
•
OVERALL OUTSIDE DIAMETER: 255.00 MILLIMETERS MAXIMUM MM
•
BORE DIAMETER: 190.00 MILLIMETERS MAXIMUM MM
•
INNER RING WIDTH: 1.2790 INCHES MINIMUM AND 1.2990 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH29.00 MILLIMETERS MAXIMUM MM
OVERALL OUTSIDE DIAMETER255.00 MILLIMETERS MAXIMUM MM
SPECIAL FEATURESOUTER RING STANDOUT OF 0.005 IN.ON SIDE OF INNER RING BREAKOUT IN
BORE DIAMETER190.00 MILLIMETERS MAXIMUM MM
INNER RING WIDTH1.2790 INCHES MINIMUM AND 1.2990 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
M3830BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 49688-01X6PC17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 49688-01X6PC17?
49688-01X6PC17 is a BEARING,BALL,ANNULAR.
What parts can replace 49688-01X6PC17?
There is 1 known substitute for 49688-01X6PC17: M3830B. Substitute compatibility should be verified for your specific system.
What is the NSN for 49688-01X6PC17?
49688-01X6PC17 is cataloged in the U.S. Government catalog under NSN 3110-00-498-6752. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 49688-01X6PC17