PartsTable
Technical Data Sheet
Download PDF

495A493DX1S495A — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

495A493DX1S495A: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 2.1250 INCHES NOMINAL IN, bore_diameter: 3.0000 INCHES NOMINAL IN, overall_width: 2.7610 INCHES NOMINAL IN, standout_width: 0.3180 INCHES NOMINAL IN, special_features: CUP WITH OIL HOLES AND GROOVE,COMPLETE BEARING WITH SPACER X1S495A,BENCH LATERAL 0.011 IN. TO 0.013 IN.

IN. This part is cataloged in the U.S. Government catalog under NSN 3110-00-253-2600, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
495A493DX1S495A
NSN: 3110-00-253-2600
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width2.1250 INCHES NOMINAL IN
bore_diameter3.0000 INCHES NOMINAL IN
overall_width2.7610 INCHES NOMINAL IN
standout_width0.3180 INCHES NOMINAL IN
special_featuresCUP WITH OIL HOLES AND GROOVE,COMPLETE BEARING WITH SPACER X1S495A,BENCH LATERAL 0.011 IN. TO 0.013 IN. IN
style_designatorSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.0310 INCHES NOMINAL IN
overall_outside_diameter5.3750 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-253-2600
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 495A493DX1S495A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
CUP WIDTH: 2.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, DOUBLE CUP, SINGLE CONES
•
OVERALL OUTSIDE DIAMETER: 5.3750 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.3180 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
CUP WIDTH2.1250 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES
OVERALL WIDTH2.7610 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER5.3750 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0310 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.3180 INCHES NOMINAL IN
SPECIAL FEATURESCUP WITH OIL HOLES AND GROOVE,COMPLETE BEARING WITH SPACER X1S495A,BENCH LATERAL 0.011 IN. TO 0.013 IN. IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SUBSTITUTES & CROSS-REFERENCES 2
3110002532600Reference document
Same NSN cross-reference
Reference document — Secondary reference
M2427Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 495A493DX1S495A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 495A493DX1S495A?
495A493DX1S495A is a BEARING,ROLLER,TAPERED.
What parts can replace 495A493DX1S495A?
There are 2 known substitutes for 495A493DX1S495A: 3110002532600, M2427. Substitute compatibility should be verified for your specific system.
What is the NSN for 495A493DX1S495A?
495A493DX1S495A is cataloged in the U.S. Government catalog under NSN 3110-00-253-2600. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 495A493DX1S495A