PartsTable
Technical Data Sheet

49532 — Technical Data Sheet

✓ Verified by PartsTable
Verbatim · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>Overview</b><br>Verbatim's range of lithium 3 volt 'coin' cell batteries, power a whole host of small portable electronic devices, including 3D glasses, remote controls and camera equipment.<br><br>The range includes the following models: CR2450, CR2430, CR2032, CR2025 and CR2016. This part is cataloged in the Federal Logistics Information System under NSN 5340-00-225-3097, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
49532
NSN: 5340-00-225-3097
FSC: 5340
CAGE: 66796 — BRUNSON INSTRUMENT COMPANY DBA BRUNSON INSTRUMENT COMPANY (USA)
SPECIFICATIONS
overall_width1.125 INCHES NOMINAL IN
overall_height0.002 INCHES MINIMUM AND 0.004 INCHES MAXIMUM IN
overall_length1.646 INCHES MINIMUM AND 1.656 INCHES MAXIMUM IN
first_end_radius0.229 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
style_designatorFLAT, DIAMOND
unable_to_decodeUNABLE TO DECODE
first_side_radius0.562 INCHES NOMINAL IN
fifth_hole_spacing0.215 INCHES NOMINAL IN
first_hole_spacing0.229 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
third_hole_spacing1.188 INCHES NOMINAL IN
first_hole_diameter0.156 INCHES NOMINAL IN
fourth_hole_spacing0.430 INCHES NOMINAL IN
NSN5340-00-225-3097
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 49532 MFR: Verbatim ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
495320InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
005619InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
537AS390-1InterchangeableGOVERNMENT REGISTRY
Insulator,plate
interchangeable
128186InterchangeableGOVERNMENT REGISTRY
Insulator,plate
interchangeable
14210-002InterchangeableGOVERNMENT REGISTRY
Insulator,plate
interchangeable
495320 1-05MMInterchangeableGOVERNMENT REGISTRY
Insulator,plate
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 49532?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 49532?
49532 is a INSULATOR,PLATE manufactured by Verbatim.
What parts can replace 49532?
There are 13 known substitutes for 49532: 495320, 005619, 537AS390-1 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 49532?
49532 is cataloged in the Federal Logistics Information System under NSN 5340-00-225-3097. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 49532