PartsTable
Technical Data Sheet
Download PDF

494MRH1 — SHAFT,AXLE,AUTOMOTIVE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

494MRH1: SHAFT,AXLE,AUTOMOTIVE.

The SHAFT,AXLE,AUTOMOTIVE is a the manufacturer industrial component. Key specifications include material: STEEL, first_end_type: SPLINED, overall_length: 19.500 INCHES NOMINAL IN, second_end_type: SPLINED, first_end_spline_type: INVOLUTE, first_end_bearing_seat: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 2520-00-928-2376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
494MRH1
NSN: 2520-00-928-2376
FSC: 2520 — Vehicular Power Transmission Components
CAGE: 05415 — LINDE LIFT TRUCK CORP. (USA)
SPECIFICATIONS
materialSTEEL
first_end_typeSPLINED
overall_length19.500 INCHES NOMINAL IN
second_end_typeSPLINED
first_end_spline_typeINVOLUTE
first_end_bearing_seatNOT INCLUDED
second_end_spline_typeSTRAIGHT
first_end_spline_length0.750 INCHES NOMINAL IN
second_end_bearing_seatINCLUDED
first_end_pitch_diameter2.750 INCHES NOMINAL IN
second_end_spline_length2.000 INCHES NOMINAL IN
first_end_spline_quantity13
NSN2520-00-928-2376
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SHAFT,AXLE,AUTOMOTIVE TITLE COMPONENT PN 494MRH1 MFR SHAFT,AXLE,AUTOMOTIVE
KEY FEATURES
•
SECOND END TYPE: SPLINED
•
FIRST END PITCH DIAMETER: 2.750 INCHES NOMINAL IN
•
FIRST END TYPE: SPLINED
•
SECOND END BEARING SEAT WIDTH: 2.500 INCHES NOMINAL IN
•
FIRST END SPLINE MAJOR DIAMETER: 3.150 INCHES NOMINAL IN
•
SECOND END SPLINE QUANTITY: 12
•
SECOND END DISTANCE FROM BEARING SEAT TO END: 3.000 INCHES NOMINAL IN
•
SECOND END SPLINE MINOR DIAMETER: 1.175 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND END TYPESPLINED
FIRST END PITCH DIAMETER2.750 INCHES NOMINAL IN
FIRST END TYPESPLINED
SECOND END BEARING SEAT WIDTH2.500 INCHES NOMINAL IN
FIRST END SPLINE MAJOR DIAMETER3.150 INCHES NOMINAL IN
SECOND END SPLINE QUANTITY12
SECOND END DISTANCE FROM BEARING SEAT TO END3.000 INCHES NOMINAL IN
SECOND END SPLINE MINOR DIAMETER1.175 INCHES NOMINAL IN
SECOND END BEARING SEATINCLUDED
FIRST END SPLINE PRESSURE ANGLE IN DEG30.0
OTHER ITEMS IN FSC 2520 — Vehicular Power Transmission Components
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
2520-00-000-3976 2520-00-000-8852 2520-00-000-9292 2520-00-001-0011 2520-00-001-3397 2520-00-001-3425 2520-00-001-3440 2520-00-001-3441
SUBSTITUTES & CROSS-REFERENCES 1
3802Z1248Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 494MRH1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 494MRH1?
494MRH1 is a SHAFT,AXLE,AUTOMOTIVE.
What parts can replace 494MRH1?
There is 1 known substitute for 494MRH1: 3802Z1248. Substitute compatibility should be verified for your specific system.
What is the NSN for 494MRH1?
494MRH1 is cataloged in the U.S. Government catalog under NSN 2520-00-928-2376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 494MRH1