PartsTable
Technical Data Sheet
Download PDF

49496 — BOOT,VEHICULAR COMPONENTS

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

49496: BOOT,VEHICULAR COMPONENTS.

The BOOT,VEHICULAR COMPONENTS is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE, overall_height: 0.562 INCHES NOMINAL IN, inside_diameter: 0.563 INCHES NOMINAL IN, outside_diameter: 1.563 INCHES NOMINAL IN, special_features: MATL THK 0.047 IN. IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-0570, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
49496
NSN: 3110-00-100-0570
NIINs: 001000570, 009225242, 014284081
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialRUBBER SILICONE
overall_height0.562 INCHES NOMINAL IN
inside_diameter0.563 INCHES NOMINAL IN
outside_diameter1.563 INCHES NOMINAL IN
special_featuresMATL THK 0.047 IN. IN
NSN3110-00-100-0570
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 49496 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 4.4375 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH0.7500 INCHES NOMINAL IN
OUTSIDE DIAMETER4.4375 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
END ITEM IDENTIFICATIONHIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
JD8210Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
730904Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
29620Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
706612Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
29747XReference document
Same NSN cross-reference
Reference document — Secondary reference
8220320-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 49496?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 49496?
49496 is a BOOT,VEHICULAR COMPONENTS.
What parts can replace 49496?
There are 8 known substitutes for 49496: JD8210, 730904, 29620 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 49496?
49496 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0570. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 49496