PartsTable
Technical Data Sheet
494115001000 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 1.609 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN, inside_diameter_length: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-191-4898, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
494115001000
NSN: 5340-00-191-4898
FSC: 5340
CAGE: A1140 — LEONARDO SPA DIVISIONE SISTEMI DI DIFESA (ITA)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter1.609 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN
inside_diameter_length0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
NSN5340-00-191-4898
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 494115001000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
INSIDE DIAMETER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
MATERIAL: PLASTIC
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
OVERALL DIAMETER: 1.609 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
MATERIALPLASTIC
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OVERALL DIAMETER1.609 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
EP-24 PE-LD01 YEL002Upgraded Successor
successor cross-reference
successor
EP24Upgraded Successor
successor cross-reference
successor
NAS820Upgraded Successor
successor cross-reference
successor
NAS820-24Upgraded Successor
successor cross-reference
successor
4270-24YUpgraded Successor
successor cross-reference
successor
10128861Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 494115001000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 494115001000?
494115001000 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 494115001000?
There are 25 known substitutes for 494115001000: EP-24 PE-LD01 YEL002, EP24, NAS820 and 22 more. Substitute compatibility should be verified for your specific system.
Is 494115001000 still available?
494115001000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 494115001000