PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 494115000600
494115000600 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: FRICTION, overall_diameter: 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN, special_features: COLOR,RED, inside_diameter_length: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, round_cap_outside_surface_condition: SMOOTH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-493-5835, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
494115000600
NSN: 5340-00-493-5835
FSC: 5340
CAGE: A1140 — LEONARDO SPA DIVISIONE SISTEMI DI DIFESA (ITA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
design_typeFRICTION
overall_diameter1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
special_featuresCOLOR,RED
inside_diameter_length0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
NSN5340-00-493-5835
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 494115000600 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
OVERALL DIAMETER: 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
DESIGN TYPE: FRICTION
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCOLOR,RED
INSIDE DIAMETER LENGTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OVERALL DIAMETER1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
MATERIALPLASTIC, POLYETHYLENE (PP)
DESIGN TYPEFRICTION
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
34310513017Upgraded Successor
successor cross-reference
successor
90980012Upgraded Successor
successor cross-reference
successor
NAS831-8Upgraded Successor
successor cross-reference
successor
686B012810Upgraded Successor
successor cross-reference
successor
NAS831-10Upgraded Successor
successor cross-reference
successor
70777Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 494115000600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 494115000600?
494115000600 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 494115000600?
There are 27 known substitutes for 494115000600: 34310513017, 90980012, NAS831-8 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 494115000600?
494115000600 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-493-5835. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 494115000600

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026