PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 49407
49407 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONDUIT,NONMETALLIC,RIGID is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, length: 120.000 INCHES NOMINAL IN, material: PLASTIC POLYVINYL CHLORIDE (PVC) BODY, case_style: SQUARE, seal_width: 0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN, trade_size: 0.750. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-5120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
49407
NSN: 5330-00-599-5120
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
length120.000 INCHES NOMINAL IN
materialPLASTIC POLYVINYL CHLORIDE (PVC) BODY
case_styleSQUARE
seal_width0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
trade_size0.750
hole_diameter0.187 INCHES NOMINAL IN
inside_diameter0.742 INCHES NOMINAL IN
outside_diameter1.050 INCHES NOMINAL IN
special_featuresSUNLIGHT RESISTANT; WALL THICKNESS 0.154 IN. IN
style_designatorPLAIN CONDUIT
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5330-00-599-5120
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 49407 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1228 FEET PER MINUTE FT
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 2.061 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 1.312 INCHES NOMINAL IN
•
SEAL WIDTH: 0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1228 FEET PER MINUTE FT
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER2.061 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER1.312 INCHES NOMINAL IN
SEAL WIDTH0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
PAD243Interchangeable
interchangeable cross-reference
interchangeable
50129Interchangeable
interchangeable cross-reference
interchangeable
ST-288Interchangeable
interchangeable cross-reference
interchangeable
BAC1503-1003Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 49407?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 49407?
49407 is a CONDUIT,NONMETALLIC,RIGID.
What parts can replace 49407?
There are 24 known substitutes for 49407: PAD243, 50129, ST-288 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 49407?
49407 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-5120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 49407

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026