PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 49392H
49392H ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CORK STRIP is a the manufacturer industrial component. Key specifications include width: 0.156 INCHES NOMINAL IN, length: 15.000 INCHES NOMINAL IN, material: CORK, thickness: 0.125 INCHES NOMINAL IN, minimum_tensile_strength: ERR-060, nondefinitive_spec/std_data: 1A TYPE AND 2 CLASS A. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-383-4655, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
49392H
NSN: 5330-00-383-4655
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width0.156 INCHES NOMINAL IN
length15.000 INCHES NOMINAL IN
materialCORK
thickness0.125 INCHES NOMINAL IN
minimum_tensile_strengthERR-060
nondefinitive_spec/std_data1A TYPE AND 2 CLASS A
NSN5330-00-383-4655
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 49392H MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.125 INCHES NOMINAL IN
•
WIDTH: 0.156 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: ERR-060
•
LENGTH: 15.000 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1A TYPE AND 2 CLASS A
•
MATERIAL: CORK
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.125 INCHES NOMINAL IN
WIDTH0.156 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTHERR-060
LENGTH15.000 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1A TYPE AND 2 CLASS A
MATERIALCORK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
MS35387-2Interchangeable
interchangeable cross-reference
interchangeable
506102Interchangeable
interchangeable cross-reference
interchangeable
40618AInterchangeable
interchangeable cross-reference
interchangeable
HHC576CLASS2Interchangeable
interchangeable cross-reference
interchangeable
1526517Interchangeable
interchangeable cross-reference
interchangeable
559D1-0868Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 49392H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 49392H?
49392H is a CORK STRIP.
What parts can replace 49392H?
There are 13 known substitutes for 49392H: MS35387-2, 506102, 40618A and 10 more. Substitute compatibility should be verified for your specific system.
Is 49392H still available?
49392H is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 49392H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026