PartsTable
Technical Data Sheet
Download PDF

49293 — VALVE,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

49293: VALVE,PLUG.

The VALVE,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, end_item_identification: PLUNGER PUMP, MODEL 1051. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-285-1332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
49293
NSN: 5330-00-285-1332
NIINs: 002851332, 014366217, 015898381
FSC: 5330 — Packing and Gasket Materials
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
end_item_identificationPLUNGER PUMP, MODEL 1051
NSN5330-00-285-1332
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 49293 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.500 INCHES NOMINAL IN
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 8
DL4W297A173Reference document
Same NSN cross-reference
Reference document — Secondary reference
4966Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
2350010Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
60051Reference document
Same NSN cross-reference
Reference document — Secondary reference
21633Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
EAB506Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 49293?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 49293?
49293 is a VALVE,PLUG.
What parts can replace 49293?
There are 8 known substitutes for 49293: DL4W297A173, 4966, 2350010 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 49293?
49293 is cataloged in the U.S. Government catalog under NSN 5330-00-285-1332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 49293