PartsTable
Technical Data Sheet
PartsTable / MRO / 4918
4918 ✓ Verified by PartsTable
Zyxel · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include phase: SINGLE INPUT, diameter: 0.375 INCHES NOMINAL IN, material: STEEL OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, duty_cycle: CONTINUOUS, slot_width: 0.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-8360, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 4918
NSN: 5340-00-200-8360
FSC: 5340
CAGE: 72260 — CORBITT CO INC (USA)
SPECIFICATIONS
phaseSINGLE INPUT
diameter0.375 INCHES NOMINAL IN
materialSTEEL OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
duty_cycleCONTINUOUS
slot_width0.375 INCHES NOMINAL IN
body_length0.625 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
slot_length0.375 INCHES NOMINAL IN
temp_rating35.0 AMBIENT CELSIUS
keyway_depth0.094 INCHES NOMINAL SINGLE END IN
keyway_width0.188 INCHES NOMINAL SINGLE END IN
NSN5340-00-200-8360
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4918 MFR: Zyxel ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
SLOT LENGTH: 0.375 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.109 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 3.250 INCHES NOMINAL IN
•
SLOT WIDTH: 0.375 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 4.063 INCHES NOMINAL IN
•
DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
SLOT LENGTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.109 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END3.250 INCHES NOMINAL IN
SLOT WIDTH0.375 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
LOOP INSIDE DIAMETER4.063 INCHES NOMINAL IN
DIAMETER0.375 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END3.063 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
ES529754ISSUE1Upgraded Successor
successor cross-reference
successor
4918Upgraded Successor
successor cross-reference
successor
79-474Interchangeable
interchangeable cross-reference
interchangeable
C350S1Interchangeable
interchangeable cross-reference
interchangeable
RCS350Interchangeable
interchangeable cross-reference
interchangeable
FFB171/04J02G2BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4918?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4918?
4918 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Zyxel. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4918?
There are 15 known substitutes for 4918: ES529754ISSUE1, 4918, 79-474 and 12 more. Substitute compatibility should be verified for your specific system.
Is 4918 still available?
4918 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4918

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026