491766: PIN,STRAIGHT,HEADED.
The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, diameter: 0.121 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN, material: STEEL COMP 631 OVERALL, head_style: FLAT, chamfer_length: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, hardness_rating: 38.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 5315-00-924-6087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| diameter | 0.121 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN |
| material | STEEL COMP 631 OVERALL |
| head_style | FLAT |
| chamfer_length | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| hardness_rating | 38.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL |
| style_designator | STRAIGHT |
| pin_chamfer_angle | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| pin_head_diameter | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
| surface_treatment | PASSIVATE OVERALL |
| under_head_length | 1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN |
| first_hole_diameter | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN |
| NSN | 5315-00-924-6087 |
| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| UNDER HEAD LENGTH | 1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN |
| PIN CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN |
| HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL |
| STYLE DESIGNATOR | STRAIGHT |
| PIN HEAD DIAMETER | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5644 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| DIAMETER | 0.121 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.