PartsTable
Technical Data Sheet
Download PDF

49122 — COVERALLS,SAFETY,INDUSTRIAL

✓ Government record, cited
Verbatim · ORING SEAL
PRODUCT OVERVIEW

49122: COVERALLS,SAFETY,INDUSTRIAL.

- Adjustable headband - On-ear sponge cushioned earphones - Adjustable Omni-directional flexible microphone - In-line volume control. Key specifications include end_item_identification: GENERATOR SET, GASOLINE ENGINE 14KW, measuring_method_and_length: 16.0 INCHES NOMINAL OVERALL IN, part_name_assigned_by_controlling_agency: HOSE, FUEL 16". This part is cataloged in the U.S.

Government catalog under NSN 5330-00-285-8382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
49122
NSN: 5330-00-285-8382
NIINs: 002858382, 013971634, 016321647
FSC: 5330 — Packing and Gasket Materials
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
end_item_identificationGENERATOR SET, GASOLINE ENGINE 14KW
measuring_method_and_length16.0 INCHES NOMINAL OVERALL IN
part_name_assigned_by_controlling_agencyHOSE, FUEL 16"
NSN5330-00-285-8382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 49122 MFR: Verbatim ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 2.750 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.562 INCHES NOMINAL IN
•
MATERIAL: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER2.750 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.562 INCHES NOMINAL IN
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SUBSTITUTES & CROSS-REFERENCES 3
50109Reference document
Same NSN cross-reference
Reference document — Secondary reference
43-166Reference document
Same NSN cross-reference
Reference document — Secondary reference
RT8728Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 49122?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 49122?
49122 is a COVERALLS,SAFETY,INDUSTRIAL manufactured by Verbatim.
What parts can replace 49122?
There are 3 known substitutes for 49122: 50109, 43-166, RT8728. Substitute compatibility should be verified for your specific system.
What is the NSN for 49122?
49122 is cataloged in the U.S. Government catalog under NSN 5330-00-285-8382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 49122