The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: GLASS ENCLOSURE, overall_length: 0.800 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 1.000 INCHES MINIMUM IN, overall_diameter: 0.310 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-978-7660, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | GLASS ENCLOSURE |
| overall_length | 0.800 INCHES MAXIMUM IN |
| mounting_method | TERMINAL |
| terminal_length | 1.000 INCHES MINIMUM IN |
| overall_diameter | 0.310 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN |
| features_provided | HERMETICALLY SEALED CASE |
| terminal_type_and_quantity | 2 UNINSULATED WIRE LEAD |
| specification/standard_data | 81349-MIL-S-19500/202 GOVERNMENT SPECIFICATION |
| current_rating_per_characteristic | 250.00 MILLIAMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE |
| voltage_rating_in_volts_per_characteristic | 480.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS AND 280.0 MAXIMUM REVERSE VOLTAGE, TOTAL RMS |
| maximum_operating_temp_per_measurement_point | 150.0 CELSIUS AMBIENT AIR DEGC |
| NSN | 5961-00-978-7660 |
| TEST DATA DOCUMENT | 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 480.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS AND 280.0 MAXIMUM REVERSE VOLTAGE, TOTAL RMS |
| CURRENT RATING PER CHARACTERISTIC | 250.00 MILLIAMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE |
| MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 150.0 CELSIUS AMBIENT AIR DEGC |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| TERMINAL LENGTH | 1.000 INCHES MINIMUM IN |
| MOUNTING METHOD | TERMINAL |
| OVERALL LENGTH | 0.800 INCHES MAXIMUM IN |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-19500/202 GOVERNMENT SPECIFICATION |