PartsTable
Technical Data Sheet
Download PDF

490-8620 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

490-8620: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -40.0 CELSIUS AND 100.0 CELSIUS DEGC, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 7.598 INCHES NOMINAL IN, center_hole_diameter: 7.283 INCHES NOMINAL IN, cross-sectional_height: 0.157 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-702-5771, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
490-8620
NSN: 5331-01-702-5771
FSC: 5331 — O-ring
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-40.0 CELSIUS AND 100.0 CELSIUS DEGC
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter7.598 INCHES NOMINAL IN
center_hole_diameter7.283 INCHES NOMINAL IN
cross-sectional_height0.157 INCHES NOMINAL IN
end_item_identificationFILTER ASSEMBLY
NSN5331-01-702-5771
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 490-8620 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 CELSIUS AND 100.0 CELSIUS DEGC
•
CROSS-SECTIONAL HEIGHT: 0.157 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 7.598 INCHES NOMINAL IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 7.283 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 CELSIUS AND 100.0 CELSIUS DEGC
CROSS-SECTIONAL HEIGHT0.157 INCHES NOMINAL IN
OUTSIDE DIAMETER7.598 INCHES NOMINAL IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER7.283 INCHES NOMINAL IN
END ITEM IDENTIFICATIONFILTER ASSEMBLY
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
516-5903 REV 00 IT 02Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 490-8620?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 490-8620?
490-8620 is a O-RING.
What parts can replace 490-8620?
There is 1 known substitute for 490-8620: 516-5903 REV 00 IT 02. Substitute compatibility should be verified for your specific system.
What is the NSN for 490-8620?
490-8620 is cataloged in the U.S. Government catalog under NSN 5331-01-702-5771. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 490-8620