PartsTable
Technical Data Sheet
Download PDF

490-400 — SWITCH SUBASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

490-400: SWITCH SUBASSEMBLY.

The SWITCH SUBASSEMBLY is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q AND GLASS SEALING ELEMENT, seal_width: 0.215 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN, construction: SOLID, overall_width: 3.250 INCHES NOMINAL IN, overall_length: 3.625 INCHES NOMINAL IN, housing_bore_diameter: 4.560 INCHES MINIMUM AND 4.600 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-352-0520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
490-400
NSN: 5330-00-352-0520
NIINs: 003520520, 009305251
FSC: 5330 — Packing and Gasket Materials
CAGE: 14711 — RSA ENGINEERED PRODUCTS, LLC DBA RSA ENGINEERED PRODUCTS LLC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q AND GLASS SEALING ELEMENT
seal_width0.215 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
constructionSOLID
overall_width3.250 INCHES NOMINAL IN
overall_length3.625 INCHES NOMINAL IN
housing_bore_diameter4.560 INCHES MINIMUM AND 4.600 INCHES MAXIMUM IN
mounting_configurationHOLES FOR SCREWS
accommodated_shaft_diameter3.970 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
component_type_and_quantity2 SWITCH AND 1 BASE
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-352-0520
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 490-400 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.215 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 4.560 INCHES MINIMUM AND 4.600 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 3.970 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q AND GLASS SEALING ELEMENT
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.215 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
HOUSING BORE DIAMETER4.560 INCHES MINIMUM AND 4.600 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER3.970 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q AND GLASS SEALING ELEMENT
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 3
ST7M328-400Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
690-400Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NSA8054-64-09Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 490-400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 490-400?
490-400 is a SWITCH SUBASSEMBLY.
What parts can replace 490-400?
There are 3 known substitutes for 490-400: ST7M328-400, 690-400, NSA8054-64-09. Substitute compatibility should be verified for your specific system.
What is the NSN for 490-400?
490-400 is cataloged in the U.S. Government catalog under NSN 5330-00-352-0520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 490-400