PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 48S013PC8
48S013PC8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, outside_diameter: 3.188 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 2.562 INCHES NOMINAL IN, cross-sectional_thickness: 0.188 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-247-7550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
48S013PC8
NSN: 5330-00-247-7550
FSC: 5330
CAGE: 71905 — DERBYSHIRE MACHINE & TOOL CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
outside_diameter3.188 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter2.562 INCHES NOMINAL IN
cross-sectional_thickness0.188 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-247-7550
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 48S013PC8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.188 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.562 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.188 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.188 INCHES NOMINAL IN
APERTURE DIAMETER2.562 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MIL-I-14652Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-14652BInterchangeable
interchangeable cross-reference
interchangeable
A-1-143Interchangeable
interchangeable cross-reference
interchangeable
12450-450Interchangeable
interchangeable cross-reference
interchangeable
S1B-309Interchangeable
interchangeable cross-reference
interchangeable
EK082Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 48S013PC8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48S013PC8?
48S013PC8 is a GASKET.
What parts can replace 48S013PC8?
There are 14 known substitutes for 48S013PC8: MIL-I-14652, MIL-DTL-14652B, A-1-143 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 48S013PC8?
48S013PC8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-247-7550. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48S013PC8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026