PartsTable
Technical Data Sheet
Download PDF

48860 — DIE,DIMPLING

✓ Government record, cited
Verbatim · ORING SEAL
PRODUCT OVERVIEW

48860: DIE,DIMPLING.

- Extremely tough and fully flexible stainless steel cable - MFI Certified using Apple’s licensed technology - Will work with future idevices and iOS software - PVC cable reliefs to protect the connection points - Premium aluminium connector cover - Sync & charge: charging and data transfer functions - Available in 2 different cable lengths; 30cm and 100cm - 2 Year Limited Warranty Verbatim Sync & Charge cables allow you to charge your device and transfer data in one single cable. Sync & Charge cables are MFi certified using Apple’s licensed technology to connect electronically to Apple host devices. The flexible stainless steel cable prevents wear and breakage and allows coiling for easy storage.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-698-3184, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
48860
NSN: 5330-00-698-3184
NIINs: 006983184, 012643232, 013364373, 013447251
FSC: 5330 — Packing and Gasket Materials
CAGE: 54123 — COLSON CORP THE (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE NITRILE OVERALL
special_featuresUSED ON HIGH PRESSURE PUMP (CAT PUMP)
NSN5330-00-698-3184
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 48860 MFR: Verbatim ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
RETAINER THICKNESS: 0.438 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY RETAINER
•
CONSTRUCTION: TWO-PIECE
TECHNICAL CHARACTERISTICS
RETAINER INSIDE DIAMETER0.625 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.625 INCHES NOMINAL IN
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
PACKING RING CROSS-SECTIONAL DIAMETER0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
RETAINER THICKNESS0.438 INCHES NOMINAL IN
MATERIALCOPPER ALLOY RETAINER
CONSTRUCTIONTWO-PIECE
SUBSTITUTES & CROSS-REFERENCES 5
5850G5002Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N15-10Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
XC447Reference document
Same NSN cross-reference
Reference document — Secondary reference
9022964Reference document
Same NSN cross-reference
Reference document — Secondary reference
32LN15-10Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 48860?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48860?
48860 is a DIE,DIMPLING manufactured by Verbatim.
What parts can replace 48860?
There are 5 known substitutes for 48860: 5850G5002, N15-10, XC447 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 48860?
48860 is cataloged in the U.S. Government catalog under NSN 5330-00-698-3184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48860