Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BRACKET,ANGLE is a Legrand industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.062 INCHES NOMINAL IN, thread_class: 2B, thread_series: UN, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-075-6052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
488097
NSN:5340-00-075-6052 FSC:5340 CAGE:31633 — ALINABAL HOLDINGS CORPORATION DIV ENGINEERED PRODUCTS GROUP (USA)
SPECIFICATIONS
material
STEEL OVERALL
nut_style
HEXAGON
nut_height
0.062 INCHES NOMINAL IN
thread_class
2B
thread_series
UN
thread_direction
RIGHT-HAND
width_across_flats
0.562 INCHES NOMINAL IN
nominal_thread_size
0.438 INCHES IN
bearing_surface_type
FLAT
thread_quantity_per_inch
32
NSN
5340-00-075-6052
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH: 1.700 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
•
SECOND LEG HOLE DIAMETER: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 4130 OR STEEL COMP 8630
•
FIRST LEG CORNER RADIUS: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
SECOND LEG STYLE: CORNER RADIUS
•
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH: 2.200 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH
1.700 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
SECOND LEG HOLE DIAMETER
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
MATERIAL
STEEL COMP 4130 OR STEEL COMP 8630
FIRST LEG CORNER RADIUS
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
SECOND LEG STYLE
CORNER RADIUS
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 488097?
488097 is a BRACKET,ANGLE manufactured by Legrand.
What parts can replace 488097?
There are 3 known substitutes for 488097: 488097, 13445, 3P50004-187. Substitute compatibility should be verified for your specific system.
What is the NSN for 488097?
488097 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-075-6052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.